Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Hythim,
Attached image have your answer. Checked the B200 M4 spec sheet, on page 24 or search with " Supported B200 M4 I/O Configurations "
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/b...
Hi,Glad to hear every thing is working fine. Option ROM is enable by default on LSI RAID cards, not sure how that was disabled. Since it was disabled, system BIOS will not able to call the BIOS for PCI card during initialization.Regards,MJ
Hi John,What is the boot order configured? Are you able to see the RAID card while going manually into the boot order (F6)?Have a look to the below link:http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/2-0/b_Cisco_UCS_...
John,Oh i got u...i was getting confuse with CIMC & IMC. Yes, it required the licence. This will help you to manager C & E series rack server. For more info on licence and installation check this:http://www.cisco.com/c/en/us/td/docs/unified_computing...
