About giles_75

giles_75 · 07-20-2019

Hello,I have upgraded the RV345. But the whole configuration is lost : VLAN, rules... Is there a way to reload the old configuration ? I did not find it in 'Configuration Management'. Or do i must rewrite the whole configuration with more than 50 rul...

giles_75 · 06-24-2018

Hello, We have a small business network with a Netgear device. Now we are migrating to a RV345(1.0.01.18) with : WAN1VLAN1 : 192.168.1.1/24 (untagged)VLAN2 : 192.168.2.1/24 (untagged)DMZ : 192.168.100.1/24 In the DMZ, we have two apache web and ssd s...

giles_75 · 07-20-2019

Thank you.Clearly something went wrong during the upgrade. Even the admin password was cleared.I though the backup configuration was handled by the device. I have to reconfigure from scratch :-(

giles_75 · 06-30-2018

I changed the 2 configurations : still doing nat. I tried traffic between VLAN1 and DMZ : also nating the addresses. I searched in the web console, I didn't find anything about NAT between VLANs and DMZ. Did I miss something ?

giles_75 · 06-26-2018

It seems that the router is doing NAT between VLAN2 and DMZ. Is it possible to disable it ?

Member Since	‎06-17-2018 04:07 PM
Date Last Visited	‎11-12-2021 12:02 AM
Posts	5

User Statistics

User Activity

RV345 Lost configuration after upgrade

RV345 Originating ip address between VLAN/DMZ

Re: RV345 Lost configuration after upgrade

Re: RV345 Originating ip address between VLAN/DMZ

Re: RV345 Originating ip address between VLAN/DMZ