About reseau.dtsi@gouv.nc

reseau.dtsi@gouv.nc · 11-07-2020

Hi, i read with attention, problems with IP CEF. I've got a trouble, and do not know how to solve it. Platform : Cisco IOS XE Software, Version 16.12.01Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1, RELEAS...

reseau.dtsi@gouv.nc · 11-09-2020

Don't worries about ip address.Ipsec tunnel goes Up, and from routers to routers is possible to ping eachother.It s possible from mikrotik LAN to ping cisco router Internal address orcisco router Lan ( see with wireshark) but no replies came.And from...

reseau.dtsi@gouv.nc · 11-09-2020

I'm sorry, is a typo error.Mikrotik as 172.16.19.250/30 and Cisco 172.16.19.254I found that external traffic is routed and not encrypted by ipsec tunnel.

reseau.dtsi@gouv.nc · 11-08-2020

cisco 9200 : debug ip packet *Nov 9 03:08:07.780: FIBipv4-packet-proc: route packet from Vlan100 src 192.168.242.254 dst 10.10.10.55*Nov 9 03:08:07.780: FIBfwd-proc: packet routed by adj to Vlan900 172.16.19.254*Nov 9 03:08:07.780: FIBipv4-packet-p...

reseau.dtsi@gouv.nc · 11-08-2020

I'll try ip access-list extended toutpermit ip any anycrypto map IEKAWE-RECIF-IPSEC 1 ipsec-isakmpset ip access-group tout inset ip access-group tout out I stack to new Cisco 9200, ipsec tunnel goes UP, only traffic originatingfrom inside routers are...

reseau.dtsi@gouv.nc · 11-08-2020

We do not have any restriction into ours LAN. So a alone LAN need to be access by every equipment, PCs, printer, and vice versa, so we choose to use acl like permit ip any 192.168.242.0 0.0.0.255 for example. I try with a line like that permit ip ...

Member Since	‎06-18-2018 10:14 PM
Date Last Visited	‎11-15-2020 01:59 PM
Posts	12
Total Helpful Votes Received	20

User Statistics

User Activity

Cisco 9300, IPSEC

Re: Cisco 9300, IPSEC

Re: Cisco 9300, IPSEC

Re: Cisco 9300, IPSEC

Re: Cisco 9300, IPSEC

Re: Cisco 9300, IPSEC