I've followed this guide to setup our Active Directory as a source of external authentication for access to our Firepower Mangement Centre web GUI https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config-guide-v63/...
Topology
2 x WLC 5508 with 13 x 2602 APs and 4 x 2802 APsNo WLC SSO HA in place - just primary and secondary controllers specified in the AP's config
I have previously posted about this issue in this thread
https://community.cisco.com/t5/wirel...
Hi,
I am planning an update to our WLC and AP's (2602s) and wanted to clarify the behaviour around the pre download function.
We are going from 8.0.152.0 to 8.3.143.0
I know from both the GUI and CLI you can issue a command to pre download soft...
Updated 5508 WLC from 8.0.152.0 to 8.3.143.0
WLC updated fine but our APs running 8.0.152.0 would not join the WLC (couldn’t even join it to download its updated software)
WLC logs below
*spamApTask3: Aug 05 13:41:25.730: %DTLS-3-PKI_ERROR: opens...
I recently attempted to upgrade our WLC environment (5508 and 15+ 2602 APs) and hit a few issues and was wondering if anyone else has encountered anything similar?
My starting point was 7.3.112.0 on our WLC with a planned upgrade path of:
7.3.112...
This root cause for this issue has now been established.
It would appear the controller in question had previously been setup to use LSC certs and configured to talk to a (now offline) CA.
Previous OS updates of the WLC didnt cause an issue but t...
This root cause for this issue has now been established.
It would appear the controller in question had previously been setup to use LSC certs and configured to talk to a (now offline) CA.
Previous OS updates of the WLC didnt cause an issue but t...
Thanks for that - I had checked it previously.
The serials of our APs were not listed as affected.
Plus the same APs are able to connect to another 5508 that was purchased at the exact same time.
The issues also affects our new box fresh 2802 A...