Hi all, I'm trying to configure an 887VA for a pppoe ADSL2+ connection with no luck. I know the ISP requires pppoe (LLC), and the pvc is 8/35. The CD light is on, and the line is up, but the 887 just won't connect.... Any help would be very much appreciated!! Below is my current config: version 15.1 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! ! boot-start-marker boot-end-marker ! ! no aaa new-model crypto pki token default removal timeout 0 ! ! ip source-route ip cef ! ! ! ! ! no ip domain lookup ip domain name *** no ipv6 cef ! ! license udi pid C887VA-W-A-K9 sn FTX160785UU ! ! ! ! ! controller VDSL 0 ! ip ssh version 2 ! ! ! ! ! ! ! interface ATM0 no ip address no atm ilmi-keepalive pvc internet-vc 8/35 tx-ring-limit 3 oam-pvc management encapsulation aal5snap pppoe-client dial-pool-number 1 ! ! interface Ethernet0 no ip address shutdown no fair-queue ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 no ip address ! ! interface Vlan1 description LAN ip address 192.168.0.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! interface Dialer1 description Commander DSL ip address ****** 255.255.255.0 ip mtu 1492 ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname ***********@ppp.onestream.com.au ppp chap password 0 ****** ppp ipcp dns request ppp ipcp address accept no cdp enable ! ip forward-protocol nd no ip http server no ip http secure-server ! ip dns server ip nat inside source route-map nat_isp interface Dialer1 overload ip route 0.0.0.0 0.0.0.0 Dialer1 ! ip access-list extended nat_acl permit ip 192.168.0.0 0.0.0.255 any deny ip any any ! dialer-list 1 protocol ip permit no cdp run ! ! ! ! route-map nat_isp permit 10 match ip address nat_acl match interface Dialer1 ! !
... View more
