About stevesloat

stevesloat · 03-28-2012

I have a 8.5 CUCM and 11 2811 MGCP gateways. I am trying to set the caller id out-bound on the FXO ports to be the same number that is on each voice por 0/0/0. The routers have 12.4.24 IOS running on them. Can this be done.

stevesloat · 06-09-2011

I have a Call Manager Business Edition and it has two h323 gateways. Each gateway has a PRI. If I lose the primary PRI all incomming calls will come in thru the second gateway but I could not dial out. I added a second dial-peer that is VOIP and now...

stevesloat · 08-04-2009

on UC 520 LAN 192.168.1.X/24 WAN 76.6.203.199/27 gateway 76.6.203.193 LAN address in 192.168.1.1on 5505 LAN 192.168.2.X/24 WAN Dynamic IPI am trying to get an IP phone (7975) on the 192.168.2.x network to register with the UC520I am sorry if I di...

stevesloat · 03-29-2012

Paolo and Aaron, Thank you both. I talked to the person in Ohio and he said he was trying to get CLID inbound and that was what the H323 and MGCP was doing. I just replaced a 6.1 CM with a 8.5 CM and the customer said all thier outbound calls wou...

stevesloat · 03-29-2012

Paolo, Thank you for your reply. I am told you can manipulate the outbound CLID on a FXO port using H323. I am also told my company has CM 8.5 using MGCP on a 2901 router with FXO ports and 15.1 IOS and they are changing the CLID outbound. I talke...

Member Since	‎01-15-2009 10:07 AM
Date Last Visited	‎08-15-2018 02:19 AM
Posts	5

User Statistics

User Activity

Caller-ID outbound on MGCP gateway FXO

2 h323 gateways with CMBE

create VPN between UC520 and ASA 5505

Caller-ID outbound on MGCP gateway FXO

Caller-ID outbound on MGCP gateway