Hi all,I've just noticed a thing looking at failed authentications on a production ISE cluster: a lot of clients, probably smartphones, are trying to connect the WPA2-Enterprise SSID using username "USERNAME". I'm suspecting this is something intenti...
Thanks Damien! Just to complete the answer, in case someone will need in the future: in ISE 2.6 this setting has been moved under Administration > System > Settings > Security Settings Regards,Matteo
I've just configured this on FMC version 6.2.3.8 following this guide: https://goo.gl/pm1e4G
Just a note: under the RADIUS-Specific Parameters section, instead of "Class=User Identity Groups:Sourcefire Administrator" I've set it to "Class=Administr...
Hello,I've had a similar problem these days: a customer was using a Siemens software in order to discover the Siemens devices on the vlan. The discovery was successful with a simple unmanaged switch, but with a Cat2960X it was partially failing (only...
I wrote here the solution, maybe someone will face the same problem.
I have solved it setting the 1Mbps data rate as Mandatory for the specific RF profile.
I Usually disable all the data rates of 802.11b, leaving only the ones of 802.11g, starting fr...
