About Quique

Quique · 06-22-2018

Dears, Its the first time that i post here and i dont know if someone have had the same problem. One month ago i bought a new router Cisco C1111 with 4G capabilites (C1111-8PLTEEA). The primary link is connected to a line FTTH via Movistar (Spanish...

Quique · 06-22-2018

Hi, I post all that you ask me. ping 9.9.9.9 source vlan 200 | source vlan 1 router#show ip nat translations | include 9.9.9.9 Pro Inside global Inside local Outside local Outside globalicmp 10.134.101.141:57 172.26....

Quique · 06-22-2018

Hi Georg Interface dialer 6 is necesary to create the wan connection. As i said in the post, this router have two connections. The primary link via FTTH and for this, it is necesary the interface dialer6. The secundary link is the 4G interface. I...

Quique · 06-22-2018

Hi Georg, I attach my entire config. Regards

Quique · 06-22-2018

Hello George, Thanks for reply me :) I have just tried to modify my dialer-list with a new access-list and default ip route and still not working. dialer-list 1 protocol ip list 2 access-list 2 permit 172.26.200.0 0.0.0.255 router#ping 8.8.4....

Quique · 06-22-2018

Hi, This is part of the configuration. I dont know if you need my entire running-config Yes, I tried with extendend and standard access-list. The access-list 1 is a typical with permit any. access-list 1 permit any

Member Since	‎06-22-2018 12:28 AM
Date Last Visited	‎06-24-2020 12:06 AM
Posts	6

User Statistics

User Activity

4G LTE configuration in new Cisco C1111-8PLTEEA

Re: 4G LTE configuration in new Cisco C1111-8PLTEEA

Re: 4G LTE configuration in new Cisco C1111-8PLTEEA

Re: 4G LTE configuration in new Cisco C1111-8PLTEEA

Re: 4G LTE configuration in new Cisco C1111-8PLTEEA

Re: 4G LTE configuration in new Cisco C1111-8PLTEEA