Hello Telecastle,Thank you for sharing your issues with the Support Community. My name is Nico Muselle from Cisco Sofia SBSC. The only thing I could think of that would cause this kind of behaviour is that your switches were not both configured the s...
Hello Thai,The PPTP is not set up between the 2 SRP527, but between your PC and the SRP527 hosting the network that has the printer. You just need enable it on the router and create a user (PPTP instead of QuickVPN). Then with the built-in PPTP clie...
Hello Thai,I'm afraid this is not supported by the SRP527W (product limitation). A workaround however could be to connect through PPTP or SSL VPN to site A to be able to print to the local printer there. Does that solution work for you ? Best regard...
Hello Thai,Thank you for participating in the Small Business support community. My name is Nico Muselle from Cisco Sofia SBSC.Basically the only thing you would need to be able to print from one side to the other is the VPN tunnel, no forwarding is ...
Hi Mark,I'm afraid there is no official guide for the CLI on these switches as it is not officially supported, reason why it is not mentioned in the administration guide. However, you could easily use the ? and Tab functions to see what commands are...