very randomly we get WLANs with data path down to our DMZ Anchors. the fix is to clear the connection on the ASA (clear conn address ) do other people see this? i've seen this in the forums for years, is there a ASA fix for this?
We have a C240 M5 with a VIC 1457. We want to use this as a standalone server connected to a 9300 switch with 2 x 10g network ports. how in the world do you configure the VIC card ports in access mode? i've removed the default port channel option and...
i'm a smart account admin, but i dont seem to have access to the smart call home portal, it says unregistered customer. i have a tac ticket open, but not sure they follow. anything special to register my user account ?
from what i can see, it looks like the reports are mainly based around vulnerabilities. but is there a report for the recommended version even if there is not a security vulnerability? i just want the 'starred' version of the software for all the dev...
i see a similar thread here: https://community.cisco.com/t5/server-networking/help-with-cisco-ucs-c220-m5l-with-vic-1457-vmware-questions/m-p/4261184 with this article https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series...
sent you the case number. it looks like the first device registration took a few hours to update the portal. I now see device management and a bunch of pending devices. also looks like each device can take up to 15 mins to register. I still have dev...
ive asked that my case move to the smart call home team. i got the one device registered, so my status is now customer admin. however i still cant see anything under registration management. it also says my device is not under contract from the emai...
