About Sanjay Goswami

Sanjay Goswami · 08-02-2018

Dear All, This is my Network Diagram. When i am trying to ping from my CISCO 4331 Router to another vlan I am unable to ping. I am putting following command. CISCO-4331-ROUTER#ping 192.168.16.1 source 192.168.15.250 or CISCO-4331-ROUTER#ping 192.168...

Sanjay Goswami · 08-04-2018

Dear Sir, No any IP Routing has been configured MAL-GIGA-SW#show ip routeDefault gateway is 192.168.16.1 Host Gateway Last Use Total Uses InterfaceICMP redirect cache is emptyMAL-GIGA-SW# RegardsSanjay

Sanjay Goswami · 08-04-2018

sh runBuilding configuration...Current configuration : 7389 bytes!! Last configuration change at 10:02:34 UTC Fri Aug 3 2018! NVRAM config last updated at 10:02:36 UTC Fri Aug 3 2018!version 15.2no service padservice timestamps debug datetime msecser...

Sanjay Goswami · 08-04-2018

Hi Andres, I appreciate for the efforts you have given for this issue. Sending you theoutputs of given command, MAL-HO-4331#ping 192.168.15.250 source 192.168.16.250Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.15.250, timeo...

Sanjay Goswami · 08-02-2018

Hi Jackson, interface GigabitEthernet1/0/35description ****** CISCO-4331 ROUTER ******switchport trunk allowed vlan 6-8switchport mode trunk interface GigabitEthernet1/0/2description *** CONNECTED TO FORTINET INT-1 ***switchport trunk allowed vlan ...

Sanjay Goswami · 08-02-2018

Hi Andres At first thanks for your quick response. Please find the required information, * Are you able to ping Fortinet IP addresses from the Cisco router when not specifying the source of the ICMP echo request in the ping command? Or by sourcin...

Member Since	‎05-10-2018 03:23 AM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	6

User Statistics

User Activity

Not able to ping another VLAN

Re: Not able to ping another VLAN

Re: Not able to ping another VLAN

Re: Not able to ping another VLAN

Re: Not able to ping another VLAN

Re: Not able to ping another VLAN