About enc

enc · 03-17-2006

Let say I have two IP SLA requester and one IP SLA RESPONDER. Do I have to use different process number at the requesters, in order not to mess up at the RESPONDER - or is the RESPONDER able to handle request from two different routers with the same ...

enc · 03-06-2006

Hi All - please help before I am getting insane. I have the following routerCisco IOS Software, 3700 Software (C3745-SPSERVICESK9-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)ROM: System Bootstrap, Version 12.3(6r) [cmong 6r], RELEASE SOFTWARE (fc1)...

enc · 01-16-2006

Hi AllIs anyone able to give me an answer on this. If I have two E1 in one MPPP and the command "no ppp multilink fragmentation" defined under the multilink interface - what will happend with my TCP sequence. Let say I send three TCP packet - packet ...

enc · 03-17-2006

I am not able to test this, but it might be an idea:On serial interfaces you can use " dialer enable-timeout" with a max value of 2147483 which is a lot of days.You can not use this command with the purpose you have direcly on an ISDN interface, but ...

enc · 03-06-2006

I found it myself - it was a bandwidth mis calculation. Easy to see - it was in clear text in the log.

enc · 03-06-2006

Yes - you are right - unfortunately I have been a bit to fast with my cut and paste - here you have the correct interface configuration:interface ATM1/0 description description mtu 1500 bandwidth 34000 no ip address no ip proxy-arp no ip mroute-cache...

enc · 01-16-2006

Hi PareshThanks for your response - I did a small test. I let one router send two different pings - one with 1500 bytes and no frag bit set and one with 100 bytes and no frag bit set. I changed the E1 to be running 56 kbps. in order to have some real...

enc · 01-16-2006

If you want to sum 2 c networs, and use 255.255.254.0 you have to use the following netwoks in pairs - 10.10.0.0 10.10.1.0 and 10.10.2.0 10.10.3.0 - next time 4 and 5. If you want to mask 1 and 2 together, you have to take 0,1,2 and 3 which means an ...

Member Since	‎03-03-2005 11:28 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

RTR or IP SLA PROCESS NUMBER

Apply policy-map to ATM VC

Packet sequence in MPPP with no ppp multilink fragmentation

Re: Backup ISDN auto disconnected

Re: Apply policy-map to ATM VC

Re: Apply policy-map to ATM VC

Re: Packet sequence in MPPP with no ppp multilink fragmentation

Re: static route