About MaeltorSYN

MaeltorSYN · 06-02-2020

Does anyone know if its possible to use an IP object group in an extended acl and then apply that acl to a route map? Eg:object-group network TestGroup 172.16.100.0 255.255.255.0 172.16.101.0 255.255.255.0 172.16.102.0 255.255.255.0 172.16.103.0 ...

MaeltorSYN · 08-13-2020

Interesting, thanks for that. I'll reach out to our Cisco rep for further info. Appreciate your quick response.

MaeltorSYN · 08-13-2020

Furqan,At the risk of resurrecting a dead thread, where did you happen to read that it was possible to change the Management IP in version 6.5 and higher? I looked through the release notes and I wasn't able to find it. Thanks!

MaeltorSYN · 06-03-2020

Thanks for the tip.I ended up using prefix lists in almost exactly that way and it worked perfectly.

Member Since	‎07-06-2018 03:00 PM
Date Last Visited	‎01-06-2021 10:06 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

Possible to use a network-object object group in bgp route-map?

Re: FTD: Need to Change MGMT IP

Re: FTD: Need to Change MGMT IP

Re: Possible to use a network-object object group in bgp route-map?