I am facing an issue in getting a physical link up between the Nexus 7700 and a Palo Alto firewall. I wanted to tweak around with speed/negotiation of the interface but dont find any commands there. Is there anything you need to enable for QSFP? How ...
HiMy ASR903 router isnt detecting the USB. I 'm using FAT32 format usb for the same. However when i use the same USB with the other 903 router, its working perfectly fine.What can be the issue? Thank you
Thank you @Sergiu.Daniluk again for your time. I think the only test left now is connecting them between the switches. I will give it a try. Will let you know in few weeks time. Yes, the QSFP's were bought through official channel/partner/distribut...
What is the result if you connect this QSFP in a different port?What is the result if you connect this QSFP in a different switch? There are a total of 8 such SFP's spread across 2 switches with same issue. Both switches connect to the PA firewall W...
@Sergiu.Daniluk The OS version is 6.2.12-------------------------------------------------------Below output of transciever details. {Although optical light seems to be visible from the fiber}SW# show interface eth 1/21 transceiver detailEthernet1/21 ...
@Sergiu.Daniluk The Module is F324FQ25QSFP-40G-SR4-S with connector MPO-12 is connected to the port. The transciever is Cisco - Avago. Will try to share the output later if the above doesnt help (dont have a full time access to the device). There is ...