Good afternoon,Does anyone have experience with configuring PMIPv6?I need to provide connectivity between subnets behind the IR1101 at the remote location and the HQ via the AT&T FirstNet network. I'm having a hard time with the Cisco docs below.Th...
Hello, I just configured the commands below on an ASA5508 running 9.5 (1). The remote endpoint doesn't support multiple ACEs in the proxy ACL... Would that work? Thanks,Francois access-list test-acl extended permit ip 10.0.0.0 255.255.255.0 any4 acc...
Hello, Could someone tell me the IOS image I need to support SHA-2 on an ASA5505? Below is some relevant info. Thanks in advance for your input! ---- My ASA5505Cisco Adaptive Security Appliance Software Version 9.1(7)4 Hardware: ASA5505, 512 MB RAM...
Hello,In our network, we use MAC ACLs to control access to our network. We have 2 interconnected distribution switches. HSRP runs on both switches and an IP ACL is activated on the SVIs in the inbound direction. We found that the IP ACL applied to t...
Hello,I have 2 core switches interconnected with two trunks. On both switches, there are 5 virtual interfaces for 5 VLANs. HSRP runs on the switches and an ACL is activated on the SVIs in the inbound direction. When I plug a laptop to a VLAN 200 port...
Hello,Sorry for the delayed feedback! The work was halted for a while... We implemented this solution as we ran into connectivity issues with one proxy-acl with two ACEs. The engineer managing the SRX created a ticket with JTAC and they recommended ...
