tironevi
Level 1
Level 1
Member since ‎09-13-2004
‎08-29-2018

User Statistics

  • 34 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 9 Helpful votes Received
Recent Badges
CCP Member
1 Helpful Vote
10 Helpful Vote
20 Replies
10 Replies
5 Replies

User Activity

Does anyone know how I can see what the internal temperature of a WLC-2006. My WLC 2006 is running software version 4.2.130.0. Thanks,ETWith my 4400 and 2100 serie WLCs I can verify the internal temperature by either the web browser's monitor tab or ...
I was wondering if the ISR Routers (Cisco 1811w) support the root-bridge and non-root-bridge feature. If not is there another device apart from the 1310 and 1410 bridges that support this feature?Thank You,VT
We currently have an 831 and 1800 series router each connected to a different ISP using ADSL. The two routers belong to the same HSRP group and only one acts as the internet gateway while the other one is on standby. We would like to Track the Virtua...
As per Cisco IOS design when authentication fails the switch sends a simulated EAP-Success message to the client so that DHCP can be implemented by the client. Taking into consideration the dot1x auth-fail command is configured.However we have notice...
I am trying to interconnect a Catalyst 3750 and a 2948G-L3 using fiber GBIC. The interfaces where the GBIC and fiber are attached show up as physically down. I have tried different ports and also changed both switches. No Luck. If I connect a 3524 t...
Community Statistics
Member Since ‎09-13-2004 07:51 AM
Date Last Visited ‎08-29-2018 12:01 AM
Posts 34
Total Helpful Votes Received 9
Helpful Votes From