I don't see the option to split tunnel websslvpn to the 3000. Where am I missing this. I can't surf the net while using sslvpn client. Know that split-tunnel is possible with cisco vpn client, and know where those options are. Don't see any options ...

Ok, I read over the brief docs in the 4.7 about AD, but how do you get AD groups (OU's) to match "groups" internal to the Vpn 3005? It is as simple as naming the AD group (CiscoCorpSslvpn) and the group on the Vpn 3005 the same thing? please provid...

Weird one, bluecoat mach5 with 6509 with 12.2(18)SXF2 ios code. for some unknown reason WCCP started blocking all ports to server that was in my access-list deny ip 10.122.50.0 0.0.1.255 anydeny ip 10.122.40.0 0.0.1.255 10.120.50.0 0.0.1.255permit ip...

Ok, got my Eigrp static route redistributed. But now Eigrp on site 2 complaining that every vlan is not "common" on both sites. Vlan192 links Site1 to Site2Site1 EigrpConfig:router eigrp 700 redistribute static metric 10000 1000 255 1 1500 network 10...

Please see txt file with all the info.Summary- Want use EIGRP as my primary routing protocol between two sites. If connecting Layer 2 circuit betweens sites fails, floating static routes will take over and direct traffic to a vpn device. Problems:1.C...