About muthu

muthu · 01-05-2017

On XR platforms, there is the notion of a commit ID for every configuration attempted on the device. Nexus switches do not have such a feature. Is there a way to find out when a device configuration was saved i.e. time at which 'copy running startup'...

muthu · 02-15-2016

I have a Nexus 9396PX in our lab to which we have a console connected. The console went unresponsive last friday. After power cycling the switch (multiple times), it would go through this initialization and then go unresponsive: Trying 172.27.250.89....

muthu · 10-02-2015

i have a Cisco UCS C210 Server in the lab. I had to power cycle the server for some reason. After power cycling, the CIMC ping works for some time (for about 10 seconds) and after that it becomes unreachable.I tried hooking up the VGA terminal to the...

muthu · 01-07-2017

This option would require us to parse syslogs. There is also the option of enabling SNMP traps, but then again we'd have to listen to all traps to filter out the configuration related ones. Polling the last commid Id or last configuration time stamp...

muthu · 01-05-2017

thanks Philip. Is there some other show command that shows the timestamp associated with the last configuration CLI command... i.e. written to running-config.

muthu · 01-09-2016

Just to update the thread. After upgrading to a later image NXOS: version 7.0(3)I2(2a), the system boots up and GEM card is recognized. Thanks Tomas

muthu · 01-08-2016

thanks Tomas. 1) I have already done this re-seating multiple times. And the inventory seems fine: (none)# show inventoryNAME: "Chassis", DESCR: "Nexus C9396PX Chassis"PID: N9K-C9396PX , VID: V03 , SN: SAL1946SWZR NAME: "Slot 1 ", DESCR:...

muthu · 01-08-2016

I have a similar problem when converting from ACI to standalone. Here the issue is that when it goes back to standalone mode, software it not able to recognize the GEM card. This causes it to reboot. Any suggestions ? 84 Booting n9000-dk9.7.0.3.I...

Member Since	‎04-21-2005 06:44 PM
Date Last Visited	‎09-22-2023 08:51 PM
Posts	10

User Statistics

User Activity

Equivalent of Commit ID in Nexus switches

Nexus 9396PX unresponsive after power cycle

CIMC ping fails few seconds after power cycle

This option would require us

thanks Philip.

Just to update the thread.

thanks Tomas.

I have a similar problem when