About Dennis_Thornton

Dennis_Thornton · 04-18-2015

Hi,I have a 3850 stack (core & access - server or user) and a couple 3750 switches ("user" access) I'm setting up to support a VOIP install. The 3750s are trunked to the 3850 stack. All are at current recommended or greater IOS.Currently I'm trying...

Dennis_Thornton · 01-11-2021

What alternatives are there? I tried the Cisco Configuration Assistant but that doesn't recognize the switches either. I recently needed a couple 48 port POE switches and went with Aruba because of how poorly Cisco is with central management.

Dennis_Thornton · 01-11-2021

I have the following switches that show as "Unsupported Device Type" -WS-C3850-24P (qty 4)WS-2960X-24PSQ-L (Qty 1)WS-C3750G-24PS (qty 3) That's my Cisco inventory. Every ... single ... switch ... is ... "Unsupported Device Type".What is the purpose ...

Dennis_Thornton · 05-14-2015

In case anyone comes across this thread this is what I ended up with. Port for the VMware server (this is a single 10Gb):interface TenGigabitEthernet1/1/3 switchport trunk allowed vlan 1,10 switchport mode trunk switchport nonegotiate switchport voi...

Dennis_Thornton · 04-23-2015

I suspect I have something munged up. I found this page on the Vmware site on a recommended setup:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004127And with those settings it didn't work. I have a ...

Dennis_Thornton · 04-22-2015

I did try the settings I used for the phone port but I get no communication using 10.10.1.0/24. Sometimes when I run the portfast command I get a warning that it won't be applied in all cases. Yes, the /16 mask is correct. I'm considering splitting...

Member Since	‎04-18-2015 10:39 AM
Date Last Visited	‎01-13-2021 12:13 AM
Posts	9

User Statistics

User Activity

Setting port for Voice + Data

Re: Cisco Network Assistant and WS-C2960-48PST-L

Re: Cisco Network Assistant and WS-C2960-48PST-L

In case anyone comes across

I suspect I have something

I did try the settings I used