Hello everyone,I'm facing a strange problem. The nexus 9300v qcow2 image is booting fine (on KVM).But all the interfaces have all 0 mac addresses:swL11(config)# show platform vnic mapped NXOS Interface VNIC MAC-Address Internal VNIC-------------- ---...
Hello Do you know if ACI supports RFC 4191 so that I can include "more-specific routes" in Routeur Advisement (RA) when an IPv6 subnet is active in a BD ?My servers have two interfaces in separate networks/VRF. I would like to push specific routes (o...
Hello Usually, on Windows, the most common SSH client is putty, that uses a different file format (ppk) for storing keys, than the openssh client on Linux/*Nix (.ssh/.pub) ... I talk about the internal file structure (not the extension). Is there any...
Hello all, I would like the APICs to talk to some VMs via in band. The VM have their own EPGs placed in a user Tenant, the corresponding BD/VRF/L3Out are in the common tenant. the network is 2.2.2.0/24. I was able to make APIC inband management IP a...
Hello all, Using the Cobra SDK, how is it possible to re-use an already established APIC Session ? The main use case is :1/ First using a script to create a session, that would perform the login (so that I ask the password, once)2/ Run several and in...
To add and complete find a somewhat solution, we managed to add an interface to the VM, that will be attached to an EPG link to the inb BD / subnet.the inb BD / Subnet don't have to be routed outside of the Fabric.
Thank you very much. For security reason, we don't want to expose the management of the APICs through L3Out (only through the secured OOB Network) ... We may have to allow trafic from oob interface APIC, to the VM interface, through our firewalls (an...
HelloThank you. but point 3 is a bit frustrating.The goal is to make HTTPs API calls to the VM (F5 management interface) in the Fabric from the APIC (for the F5 ACI Service Center App).Behind the OOB, I have several subnets.In the User tenants, I may...
HelloI'm struggling with inband vs ooband management myself.I discovered that you need to configure an inband management IP address for the leaf swtiches (on which the APIC is connected) or at least the one that has the active link.By doing so, it se...
