I am using VPN Concentrator 3030, with image 4.1.7.D. I configured remote access & LAN-to-LAN VPN on this concentrator. Now because of my remote access users have a problem to access VPN through NAT/PAT, I enable a NAT-T. (In Configuration | Tunnelin...

Hi, I am try to use site to site VPN through VPN concentrator 3030 at both side. Site A has a lan Ip address 192.168.1.x/24 and my side IP address is 172.16.1.x/24. Now when source packet from 192.168.1.x subnet come to my VPN, I want to NAT it to 1...

Hi, My internet router are connected to two different ISP.On my server and with both ISP routers, BGP is running. I am using PAT to access the internet. Now I configured two default route on my router, one for each ISP. Now if both ISP's link are co...

Hi, I am using LMS 2.2 and I configured all the devices to send snmp trap to LMS.DFM is configured for all the devices. Now when the devices restart, it's send a cold start trap to DFM but I can't find coldstart trap in DFM monitoring console. I wan...

Hi, Presently I have a 6513 with MSFC running IOS image. I configured 25 L3 vlan on cat 6513. ALl the vlans are using vlan IP address as a default gateway. Now I want to install FWSM on this switch, I want to use 1 vlan for outside, 2 dmz vlan and o...