About Nishant Kumar

Nishant Kumar · 09-11-2014

I am getting below error in new 7606 installed in our network.%DEV_SELENE-DFC2-3-SRAM_ECC: Selene 0 SRAM High Single-bit ECC error, error status: 0x400182505 I am unable to find exact reason for this error over internet.Someone, please help me get de...

Nishant Kumar · 07-03-2014

Hi All, I need help in creating a EEM script in Cisco router 7606 as per below requirement: >> Monitor CPU Utilization >> I want script to start working only When CPU Utilization remains more than 85% for atleast 5 minutes>> Once event is triggered i...

Nishant Kumar · 07-03-2014

The place where I am working, we have 7606 router which is connected to various LAN segments. Sub-interfaces are defined in Ethernet ports for VLAN segments. Each LAN segment is running RSTP in rings, so BPDU packets is expected on VLAN subinterfaces...

Nishant Kumar · 06-25-2014

Please find below DCN network overview. All Generic Routers and 3750 switch running OSPF. All interfaces of 3750, server IP and router interfaces connected to 3750 are in same network of 192.168.1.0 /24. Server is accessing whole network via 3750.Now...

Nishant Kumar · 06-19-2014

We are facing issue with Cisco 7606 Router Utilization going High 99% or, even crashing due to High ARP Input Process. Even our traffic fluctuated few times during this High CPU.R1#sh sh proc cpu sortedCPU utilization for five seconds: 100%/36%; o...

Nishant Kumar · 07-06-2016

Thats Good .. Do we need software IOS/module update for same ??

Nishant Kumar · 05-23-2016

Is "CSCuu24747 commit auto-save unique filename" working in any version. I want the auto-save to generate a unique name which include timestamp.

Nishant Kumar · 05-23-2016

How to change file name to include date & time so that backup files are not overwritten.

Nishant Kumar · 05-23-2016

Hi Jacek, Could you please explain this script little. What it does and how to implement? I am also trying to find solution to save file with time on each commit command, so files are not overwritten. I used to archive in IOS, with $h/$h and it wo...

Nishant Kumar · 09-11-2014

Hi Inayath, Thanks for the reply.How can I know the interface where this error is coming ?? Which module need to be reset/changed?

Member Since	‎05-25-2012 04:25 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	31

User Statistics

User Activity

DEV_SELENE-DFC2-3-SRAM_ECC

EEM Script to enable netdr on high CPU utilization

Info needed on use of BPDU guard

Stop Advertising OSPF routes from 3750 Interfaces

Cisco 7606 -- CPU Utilisation High Due To ARP Input Process -- High ARP Flood -- Layer 2 Loop

Thats Good .. Do we need

Is "CSCuu24747 commit auto

How to change file name to

Hi Jacek,

Hi Inayath, Thanks for the