Hi CSC,I came across a interesting sympton. Please refer to the following topology.host 1 <-> R1 <-> R2 <-> FW<-> host2host 1 is configured to send syslog to host2, however due to firewall ACL is not configured, this has caused a spike to 99% in R1 w...

Hi CSC,I have tried to implement IP SLA to monitor udp-jitter for voice packets, but it was not successful.Configuration on R1R1#show run | sec ip slaip sla 1 udp-jitter x.x.x.8 5000ip sla schedule 1 life forever start-time nowip sla 2 udp-jitter x.x...

Hi CSC,I am attempting to do nat in the following order:1. DestA (Translated DestA1) <-> Real IP (Egress A)2. DestA (Translated DestA2) <-> Real IP (Egress B)3. DestA (Translated to Egress A) (using PAT) -> Real IP (Egress A)Would option 1 and 3 clas...

Hi CSC,I have a question,If ACL does not allow host to communicate, why is not the source IP be the firewall interface that deny the communication? This is detrimental as it does not reflect who is the root cause. Any way to reflect who is denying th...

Hi CSC,Is there a way to extract which traffic is hitting which rule from syslog? Thanks.Rgrds,Benson