We have dlink dir320 router and cisco 877W.The goal is to make a 877W to work as a wireless client of dlink dir320 and brigde the LAN&WLAN so than the LAN clients of 877W could take DHCP from Dlink 320 directly.Here's the config of 877w: ! bridge irb...
Hi all! Trying to add a redundant ISP connection to 877 unit in order to failover the main one (dsl).The new ISP gives ethernet and uses dhcp.sh ver:Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(24)T5, RELEAS...
Hello,I've got this MCU 3515 unit with following software versions:Software: 5.5.3.0.14EMP: 5.5.3.0.4MCU: 5.5.3.0.5Successfuly integrated with CUCM 6.1 and used as hardware conference bridge.SCCP service was enabled and configured. No problems here: ...
Hello all.I've successfully integrated presence server with CUCM 6, i can login to personal communicator, send messages to other users and use phone mode as desk/soft (and place calls) and also make calls directly from outlook with cupc plugin.The qu...
There's a very funny situation with latest CNA release 5.7:Following the release notes for 5.0 and later (updated jan 15 2012), you can still add the PIX firewalls: Firewalls
Cisco PIX 515E firewalls. PIX firewalls do not support the Cisco Discove...
my assumption that the router did not like the dhcp offer because of ISP's dhcp relay. That is, the source MAC of the frame with DHCP OFFER (closest ISP's switch) differs from actual dhcp source. Debugs are weird, thats true...
figured it out with the following settings:no ip dhcp-client broadcast-flag!interface Vlan3 ip dhcp relay information trusted ip dhcp relay information check-reply none no ip dhcp client request tftp-server-address no ip dhcp client request netbios-n...
the ISP has DLINK as dhcp server it's not public IP, indeed, but it should be so, it works through NAT somewhere on ISP side.Since no crucial services are running, we haven't ordered static public IP considering additional charges.It's a cable conne...
configure a dhcp client-idCould you please be more specific? I tried setting this option to "Fastethernet 1", so it's MAC appeared as cliend-id in the dhcp debug - nothing changed.have spanning-tree portfast under interface.Also tried this...update I...
