About mateid1234

mateid1234 · 07-19-2009

Hi there,I have a problem with an 1811w router that has so far eluded all my atempts at solving it. The setup is fairly simple: I have 2 unequal ISP connections that service several computers acrosss a lan, based on access lists (some go through ISP1...

mateid1234 · 02-16-2008

Hello,I have configured WebVPN on a 1811W router running IOS 12.4(11)XW5, and although the gateway is set directly on an outside interface, the 443 port appears filtered to clients connecting through that interface (inside interface traffic is allowe...

mateid1234 · 07-19-2009

Hello Giuseppe, and thanks for trying to help me out. Here's the complete config (minus the sensitive information)- hope it helps!

mateid1234 · 07-17-2008

Problem solved!It wasn't even necessary to implement a local policy route-map, since I don't intend to access the router from both interfaces.What I did was to simply switch the metrics on the default routes and thus force the router to use the corre...

mateid1234 · 07-17-2008

I use a free DDNS service for Di0, but I removed the relevant lines from the config file because the username and password were shown in clear.

mateid1234 · 07-17-2008

Both interfaces have dynamic IPs. Fa0 aquires the ip address thru DHCP and Di0 thru IPCP (PPPoE).

mateid1234 · 07-17-2008

Sorry, the attachement got lost while writing the message.

Member Since	‎02-16-2008 08:10 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	17

User Statistics

User Activity

1811 router - high cpu load in dual wan config

WebVPN - no connectivity from outside interface

Re: 1811 router - high cpu load in dual wan config

Re: WebVPN - no connectivity from outside interface

Re: WebVPN - no connectivity from outside interface

Re: WebVPN - no connectivity from outside interface

Re: WebVPN - no connectivity from outside interface