About jdanan371

jdanan371 · 12-28-2013

is it possible to connect a WS-C4948 switch to a Nexus 5010? I have a flat network with no vlans.I know you are suppose to use the first 8 ports of the Nexus to get it to be on a 1GB port. What gbic am i to use on the ws-c4948 switch? if using a fibe...

jdanan371 · 02-13-2014

I was able to get it to work.....thank you for the guys who responded!!configuration on the WS-C4948:interface GigabitEthernet1/48 description connection to nexus5010 media-type rj45interface Vlan1 ip address 10.x.x.226 255.0.0.0ip default-gateway 1...

jdanan371 · 02-07-2014

WS-C4849 <---------------> Nexus 5010 (connected with a cat 6 ethernet cable)WS-C4849 interface GigabitEthernet1/48Nexus 5010 interface Ethernet1/1 (using a Cisco 1000BASE-T SFP Transceiver Module for Category 5 copper wire, spareMfg. Part#: GLC-T )c...

Member Since	‎02-22-2008 05:11 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

connecting a WS-C4948 to a Nexus 5010

connecting a WS-C4948 to a Nexus 5010

Re: connecting a WS-C4948 to a Nexus 5010