I have a 867VAe-K9 with VDSL connection. Last two days i take this error msg: %SYS-2-INPUT_GETBUF: Bad getbuffer, bytes= XXXX, for interface= Ethernet0. As a result interface Ethernet0 change state to down.
This is the right way for running Cisco vpn client on windows 10 :It works for me.http://www.puryear-it.com/blog/2015/08/18/install-cisco-vpn-client-windows-10/
Thank you Francesco , my ISP settings are : PTM with 802.1q (VLAN-835) MTU 1400 and encapsulation PPOE. with ATM interface i can sync with DSLAM, I take a VDSL controller UP but Daemon Status N/Aand i can not take a public IP from ISP.The problem is ...
Hi rvarelac,Can i use windows built in client for L2tp/ipsec with xauth and 3DES?Also i use cisco 867VAe-K9 and i think anyconnect is not a option for me and with this setup.
I found a more easy solution, and also very simple. First i found Internet Explorer inside windows 10 [just search ''internet''] then install java, and that 's all....
