About ursshared

How to profile 2802I Access Point in ISE · 03-31-2017

We have some new 2802 access points that are not profiling in ISE. Any ideas on a profiling policy for ISE to correctly profile these AP's?

ursshared · 01-13-2015

I am setting up a fax system. A PRI will come into a router which will connect to a rightfax server via sip. I have a DID range on the rightfax server of let say (385) 555-xxxx. So do I need a voip peer and a pots peer to get the calls from the PS...

ursshared · 04-25-2012

We currently run NAC here and are looking at migrating to ISE. We are looking for any experiences you may have had and your opinions of this migration. Thanks.

ursshared · 03-16-2012

I need to change the username and password ACS uses to connect to AD. I do a "clear configuration" and reboot and am unable to join the ACS appliance back into my AD with a different username and password. I am able to rejoin the ACS machine to th...

ursshared · 03-24-2010

We are having problems with a mac running OS 10.6 using a ATT Cellular card from Sierra wireless. The machine is able to connect to the VPN using both the IPSEC client and the Anyconnect client fine but will not run the posture assesment with the NA...

ursshared · 03-19-2012

The error I get is:This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page.I wonder if there is something wrong inside ACS?

ursshared · 03-24-2010

I am running ver 4.7.2 on my CAS / CAM.It would seem to that we have running up against bug CSCsy45807.http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy45807Any idea on a workaround?

ursshared · 03-08-2010

I can ping the machine from both machines. I cannot do a traceroute to the machine from either switch.

ursshared · 02-20-2009

Will this work having the remote users restricted to one vlan on the ASA separate from my inside interface? Or will all traffic have to pass through the nac and exempt everything but the vpn traffic?

ursshared · 07-23-2008

Which check accurately looks for the dat update? The checks we looked at are all registry checks and the all look in the wrong place in the registry.Thanks.

Member Since	‎05-10-2007 07:43 AM
Date Last Visited	‎10-20-2021 12:05 AM
Posts	22

User Statistics

User Activity

How to profile 2802I Access Point in ISE

Dial peers for faxing

NAC migration to ISE experiences

Change username in Active Directory config in ACS 5.3

ATT Wireless and NAC Agent 4.7.2

Change username in Active Directory config in ACS 5.3

Re: ATT Wireless and NAC Agent 4.7.2

Re: MAC Address not populating on 6500's

Re: NAC Implementation

Re: NAC and Virus Scan 8.5i