About skipvergon

skipvergon · 12-02-2013

Just installed the cmterm-devicepack8.6.2.24097-1 device pak for 8831 functionality in our 8.6.2 system. Since that install, our 8945 phones do not auto dial the VM pilot number when the messages key is pressed. Instead, a visual menu appears that ...

skipvergon · 07-11-2012

We are migrating from Unity 4.2 to Connection 8.6.A caller comes into a Connection Handler and are advised that if they know the extension they want to call, they can dial it at any time. Functionally. everything is working great. However, in 4.2 w...

skipvergon · 07-10-2012

I have a brand new Cisco Unity Connection (8.6.2.20000-76) cluster that I am integrating with a Communications Manager Cluster (8.6.1.20000-1). I have gone through all of the steps in the SCCP Integration guide.I have this message "One or more port ...

skipvergon · 06-20-2012

I'm trying to configure a Manager's extension so that when he places a call from that extension, it does not show his internal extension on the dsiplay of the called line. I have followed the steps outlined here: https://supportfo...

skipvergon · 06-20-2012

Brand new CUC 8.6 installation and integrating to CUCM 8.6. Is there a standard DN to start the VM ports at? Is there a consideration for these ports if your DN scheme is 5 digits vs. 4 digits?Our old cluster (CCM 4.2 & Unity 4.2)...

skipvergon · 07-09-2018

I just ran into this situation where the CUCM admin application account created during installation was used in UCCX as the AXL user. Changing the AXL user in UCCX to a newly created CUCM application user did NOT delete the CUCM admin application ac...

skipvergon · 01-24-2014

Manish Gogna wrote:I have seen TAC publish specific ES versions of firmware for 8945 to fix this issue, so i would sugges engaging TAC to get the ES as well as check why its still not fixed in ver 9.4.1, bug applies to CME though.https://tools.cisco....

skipvergon · 01-23-2014

jimander wrote: Any traction on this one? I'm seeing the same thing in 9.4.1 (supposedly the 'fixed-in' version) and I'm running CUCM 8.6.2 which according to the bug is not affected anyway.Was not aware of the 9.4.1 firmware. I will download and tr...

skipvergon · 12-10-2013

You CANNOT use the "Both" option. It was tested. The only configuration that works is "Internal". If you use "Internal", it breaks any external services you are using.I'm sure has to do with the Visual Voicemail feature that was added to the 8945 ...

skipvergon · 12-09-2013

Wanted to update everyone that it is a new bug.https://tools.cisco.com/bugsearch/bug/CSCul85579As I mentioned earlier, if your default "Services Provisioning" setting is "internal" or the phone is manually set to "internal", then you do not see the b...

Member Since	‎08-14-2009 07:29 AM
Date Last Visited	‎04-17-2024 09:20 PM
Posts	26

User Statistics

User Activity

8945 - Messages button not auto dialing VM

Unity Connection 8.6 - Transfer from Call Handler to CUCM

New Unity Connection Integration - Port Group Reset Issue

CCM 4.2 Hide/Mask DN on Internal Calls from Specific Extension

CUCM 8.6 / CUC 8.6 Choosing VM DN Port Range

Re: Hi Apparently it is a new

8945 - Messages button not auto dialing VM

8945 - Messages button not auto dialing VM

8945 - Messages button not auto dialing VM

8945 - Messages button not auto dialing VM