About kngo

kngo · 07-10-2012

I am trying to iSCSI boot RHEL6.1 using our B200 and M81KR Palo nic.Installation of RHEL6.1 is successful, but I encounter a "Kernel panic - not syncing: Attempted to kill init!" error message when I attempt to boot the OS.Network configuration:-----...

kngo · 07-11-2012

Thanks, Padma. I will file one shortly.Just an additional point of reference..I may be encountering https://bugzilla.redhat.com/show_bug.cgi?id=794751 which won't get fixed til RHEL6.4

kngo · 07-11-2012

Can someone please explain to me why RHEL is able to iSCSI boot if I have a local disk installed? In my original post, I did installation with the local SAS drives physically removed from the blade. In this setup, booting without SAS drives caused th...

kngo · 07-10-2012

Thanks, Robert! Removing the 2nd iSCSI vNICs worked and I was able to successfully boot Win2k8r2.Are there similar pitfalls with RHEL6.1 or SLES11update1? With RHEL6.1 I'm encountering a Kernel panic during boot. And with SLES11update1 the installer ...

kngo · 07-09-2012

I countered similar problems during my attempts to iSCSI Boot W2k8r2 with UCS blade and Palo M81KR.I loaded the driver to detect the iSCSI installation LUN, and installation was successful. Howerver, I get a BSOD when booting into Windows. BSOD doesn...

Member Since	‎07-09-2012 06:13 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

iSCSI booting RHEL6.1 on B200 UCS M81KR

iSCSI booting RHEL6.1 on B200 UCS M81KR

Re: iSCSI booting RHEL6.1 on B200 UCS M81KR

Re: iSCSI Booting Win2k8R2 on UCS with EqualLogic

Re: iSCSI Booting Win2k8R2 on UCS with EqualLogic