About kuesteral

kuesteral · 06-22-2012

I can ssh to the routers 10.1.3.1 int but not to the 10.1.3.x dhcp clients. Before the internet access and nat stuff was added to this config ssh worked.The problem is when performing ssh to a 10.1.3.x unit from a 10.1.1.x unit. They get a login and ...

kuesteral · 06-21-2012

Hi,I am trying to ssh the 10.1.3.x side from a 10.1.1.x address.I can ssh into my routers 10.1.1.190 int but not the 10.1.3.1 int. My goal is to ssh into 10.1.3.1 and more importantly any dhcp clients of it (10.1.3.x).Current configuration : 1434 byt...

kuesteral · 05-18-2012

Hi,Router configs not something I work on often so pardon my ignorance if this is an easy one. I have looked over older posts that seem relavent but am not 'getting it'.I can ping google.com from the router but not from a client attached to the route...

kuesteral · 11-04-2011

All,I have a small internal network setup. The goal we are trying to accomplish is have one side of the 1721 router give out DHCP addresses and allow users with static IP's from the other interface to ssh into the DHCP clients. We do not want the sta...

kuesteral · 10-21-2011

Hi,Long time since I have had to configure a router and have a small project I need help with.Here is what I have in a simple diagram:PC(static IP)--to--Switch--to--(Ethernet0 int, WIC0)1721 router(FastEthernet0 int, built-in)--to--Switch--to--PC(DHC...

kuesteral · 07-12-2012

OK, follow up as promised. Things just got delayed here.We have this working now and it turned out to be the gateway router (RVS4000) at 10.1.1.2. We added a route for 10.1.3.0 255.255.255.0 10.1.1.190 to it. The Cisco 1721 config had the nat stuff r...

kuesteral · 06-26-2012

Hi guys,The network mask of clients in the 10.1.1.x side change their mask to /16 in order to access the 10.1.3.x just for clarification.We do not ever ssh from 10.1.3.x to 10.1.1.x but I uunderstand your wanting to test that and we may test that ev...

kuesteral · 06-26-2012

handoko-The 1721 router is on 12.3 main ver. and it only has ssh ver1.5. There are newer versions of IOS that show ssh ver 2 but we don't have the ability to download them.The RVS 4000 is for 10.1.1.x internet access, the 1721 only serves machines we...

kuesteral · 06-25-2012

To Rick,Took out all but one static entry, same problem.To handoko,When the Cisco 1721 is taken out of the equation the router/gateway that connections go thorugh is an RVS4000 with little or no configuration done to it. This is the unit that provid...

kuesteral · 06-22-2012

Let me restate the nat config as I messed that up.We have nat on the interfaces to allow internet access for the 10.1.3.x clients. (This stopped ssh from working.)We added static nat routes to get ssh to work for these same clients. except we have th...

Member Since	‎10-21-2011 02:50 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	24

User Statistics

User Activity

SSH-Access Denied when password is entered

Can ssh into one interface but not the other

Cisco 1721-no internet for dhcp client but can ping internet from router

NAT and DHCP, duplicate IP issue

Cisco 1721 router-how to configure IP to cross two router interfaces

SSH-Access Denied when password is entered

SSH-Access Denied when password is entered

SSH-Access Denied when password is entered

SSH-Access Denied when password is entered

SSH-Access Denied when password is entered