http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/operations/n5k_fcoe_ops.html#wp1080158--snip-- LACP and FCoE To The Host Today, when deploying FCoE over a host-facing vPC, the vFC interface is bound to the port channel interfaces ...
You may want to check this thread :https://supportforums.cisco.com/thread/2059109Else try the following :switch# config terminalswitch(config)#switch(config)# interface mgmt0switch(config-if)# switchport duplex fullswitch(config)# exitswitch#switch# ...
1) The NetApp Target CNA's support attachment via SFP+ and fiber optics or via twinax cable.Note that this depends on which part you've got installed :X1139A-R6 - fiber (QLE8142)X1140A-R6 - copper (QLE8152)2) For interoperability and some configurati...