About chris.black42

chris.black42 · 07-06-2012

I have an interesting case where the RightFax server is not seeing any ANI/DNIS information coming from CUCM. The steup is pretty standard: PSTN ---> MGCP Controlled GW ----> CUCM ---> Route Pattern ----> SIP Trunk ----> RightFax Server. RightFax doe...

chris.black42 · 11-23-2015

Followed above steps and I got my TSP working. Thanks much!

chris.black42 · 07-12-2012

@aokanlawonThank you very much for the step through. That helps with disecting the SIP information. The RightFax vendor is still questioning why on his debug the ANI/DNIS values output are blank. My only response was, "That sounds like a Layer 7 issu...

chris.black42 · 07-12-2012

Not opposed, would like to avoid that until I give up or this wall I'm banging my head on does. =) I've attached a CUCM trace log. Fire up VLT and parse out for 980 or and IP ending in .19 That would be the RightFax Server. Here is something odd thou...

chris.black42 · 07-11-2012

Afternoon Shane, I'm still banging my head on this, I'm looking at debug statements that show the DNIS/ANI leaving CUCM. When they get to RightFax, their debugs show no information. So of course the error falls back to my setup...somewhere. PSTN Rout...

chris.black42 · 02-21-2012

Nomy, I'm running CME with 15IOS on a 2851 using 9971's and 7965's as a demo router for our company. It works well and I do not have any licensing installed. Chris.

Member Since	‎11-16-2005 10:27 PM
Date Last Visited	‎08-17-2018 12:04 AM
Posts	7

User Statistics

User Activity

CUCM to RightFax via SIP missing ANI

Followed above steps and I

CUCM to RightFax via SIP missing ANI

CUCM to RightFax via SIP missing ANI

CUCM to RightFax via SIP missing ANI

CME 4.2 Upgrade to CME 8.6