Hey All, i came across the same issue - if the port is configured in FEC mode, change into Auto mode and turn the port shut. Change the Duplex settings to whatever the connected bandwidth is in my case it's 10000. and turn on the port by no shut. int...
Shutdown the port down and No Shut - repeat until it states up. If you have physically access to the port unplug any attached media and do the same.Hope it helps...!
Check ISSU impact prior to upgrade
Recently I upgrade from 5 to 7.3.3 considering the following upgrade path
5 >6.0.2>7.0.8>7.1.5 >7.3.3
Good luck
Network Consultant DC
Check ISSU impact prior to upgrade
Recently I upgrade from 5 to 7.3.3 considering the following upgrade path
5 >6.0.2>7.0.8>7.1.5 >7.3.3
Good luck
Network Consultant DC