About k.cherian

k.cherian · 10-21-2008

Hi, The query here is what is selected first: The DR or the BDR?From the selection process, it seems that the BDR is selected first and then DR. If there is no DR present, then the BDR becomes the DR. My second question is, how do the routers vote ...

k.cherian · 04-17-2008

Hello Tutor, My query is with regards to the DR and BDR selection process in OSPF. We all know how the selection process works , with regards to the highest priority or ip address etc. When routers send across hello packets across to each...

k.cherian · 12-07-2008

Hello Vaibhav, Is the Cisco router configured to send broadcasts or unicast Dhcp Offers? By default Vista has DHCP packets sent with the broadcast flag set. http://blogs.technet.com/teamdhcp/archive/2006/11/08/use-of-broadcast-b-flag-in...

k.cherian · 12-06-2008

Hi Wilson, There is noting wrong with that, but is it possible you could us with a rough diagram of how the topology looks like?Thank you.-/ Kiran

k.cherian · 12-02-2008

Hi David, On Vlan 10, since we are allowing access to all other Vlans, we would not need any ACLs on that Vlan. For Vlan 20 and 30, we can configure and apply a standard ACL that will deny any packets with a destination address to either of ...

k.cherian · 12-02-2008

Hello Jr, Just an addition to the earlier information provided.I am providing the link to one of the Cisco documents where in, it provides and functional difference between the Fast Ethernet ports and Gigabit Ethernet ports. http://www.cisc...

k.cherian · 12-02-2008

Hi Jr, I agree with Jon. As long as the clients (End stations or Servers), have the nic cards configured for auto negotiation mode, they will jel along real well with Cisco switch Gig ports which also are configured for auto negotiation mode. -...

Member Since	‎04-17-2008 04:13 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	17
Total Helpful Votes Received	9

User Statistics

User Activity

OSPF v2 ( DR and BDR Selection)

OSPF DR/BDR Selection

Re: windows VISTA not obtaining IP from router(DHCP)

Re: subnetting question

Re: Problem with acces-list permit and deny

Re: Speed/Duplex Settings

Re: Speed/Duplex Settings