This is local to the server where Cisco JTAPI is installed. If you use Cisco JTAPI preferences application to change the setting, it will use this port to communicate the change to "jtapi.jar". You can change the JTAPI trace level, manage TLS connect...
Terminal connections are not created for external address/terminals like PSTN phones. As you mentioned the Connection or callControlConnection states should be used. In basic call scenario, even for external PSTN phones you should see connection eve...
When you conference 2 calls on the CTIPort, 3 parties are in conference one of which is CTIPort. After conference is complete you can disconnect CTIPort and let the other parties continue. There are service parameters on CUCM admin that disconnects t...
When you say parallel call distribution it seems to indicate that all the phones should ring at the same time when a call comes into RoutePoint (RP). If one of the user answers the call, calls on all other phones should be disconnected. if this is wh...
com.cisco.cti.util.Condition is used internally by Cisco JTAPI and is not an interface available to applications. It is not a good practice to use any thing not defined in the extensions and JTAPI 1.2 spec. Since this is not a Cisco extension the im...
