About _Akeem721

_Akeem721 · 08-18-2015

I want to create a configuration where I have end devices across multiple vlans with the end devices on the same network. I want to use a script to move the devices to desired vlans using port-vlan management on the switch. My goal is to be able to d...

_Akeem721 · 08-18-2015

For this specific test network i'm going to keep the device pool down to 10 devices but the plan is to scale up from there. I was actually just reading up on proxy-arp so i'll give that a try.I guess another option is to create dhcp pools on the vlan...

_Akeem721 · 08-18-2015

if I haveSub-int 8.10: ip: 192.168.10.33 /27 (ip used for gw to vlan 10) Sub-int 8.20ip: 192.168.10.65 /27 (ip used for gw to vlan 20) *Initital Config before moving devices, both vlans are in separate subnets*vlan 10:vlan10_pc: 192.168.10.34 /27dev...

_Akeem721 · 08-18-2015

Thanks for the reply Jon.I want the vlans each with a subnet taken from the same major network, just as you said. I am new to networking in general so I'm not sure if this kind of setup is frowned up. Im thinking that with this setup, if I have a PC ...

Member Since	‎08-18-2015 08:34 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

Is it possible to have multiple VLANs on the same network, but different subnets?

For this specific test

if I haveSub-int 8.10: ip:

Thanks for the reply Jon.I