jwen2

The error below is not about the config template content but the improper config file directory or r...

Please make sure to follow step 3 and 4 3.Create your own config.json Customized configuration is ne...

Please contact your local Cisco team to come to us for the .msi pattern file.

Just want to let you know that we posted IXM LoRaWAN 2.0.32 on Cisco.com. Tied to new LRR 2.4.21 pac...

Did it happen for all your units or just a specific one?

All right, please open case in Cisco TAC.

Press the button and hold on for a minute and then release it, please try again.

Run the CLI "no lpwa modem radio off" from IR809/829.

From 2.0.30, the privilege of LXC is downgraded to user level by the request from our SP customer. T...

There has no such way at 2.0.30 release based on the security concerns from existing customers. If y...

When the IXM is working on the virtual interface mode, you can SSH from 8x9 to IXM host and then SSH...

You can use CLI (show inventory) to read the gateway MAC or chip ID.

Software Download - Cisco SystemsUpgrade Linux kernel to 4.4.52SHA256 for the firmware signature and...

************************************************************************ IMPORTANT NOTE: This pre-in...

Our software image never pre-install any LRR from manufacturing. No idea how you got this unit with ...