About alex.harvey

alex.harvey · 06-27-2012

Hi,Firstly I am new to cisco's voice setup, and have a UC560-T1E1-K9 which I need to configure as just a basic gateway. Essentially i want to setup trunk-to-trunk between ISDN PRI and TCP SIP but do not have the first idea where to start.The main aim...

alex.harvey · 07-17-2012

Hi Adam,Thanks for all your work above. We're making some good progress. I have the following issue though 000225: Jul 17 17:27:43.623: ISDN Se0/3/0:15 Q931: RX <- SETUP pd = 8 callref = 0x0001 Sending Complete Bearer Capability i = 0...

alex.harvey · 06-27-2012

The following link shows a basic view of what the setup looks like. I appologise for the crude drawing but i'm mobile at the moment.http://i.imgur.com/Zohjz.pngWe had an IP PBX which had an LCR trunk-to-truck plan for the 120 odd numbers to direct th...

Member Since	‎11-15-2007 02:34 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

UC560 T1E1 with Direct TCP SIP

UC560 T1E1 with Direct TCP SIP

UC560 T1E1 with Direct TCP SIP