About rpulley

rpulley · 06-15-2021

I am running 9.8(4)26 on a FPR-2130 and hit this bug. So the affected version is wider than stated by Cisco. What version does not contain this bug either Newer or Older code? I am trying to determine what my options are for changing to different c...

rpulley · 09-22-2011

I am trying to upgrade all my firewalls to Security Plus but I am not sure what firewalls are needing the upgrade. Is there a SNMP pull I can do to see what license is on my firewall? example: "This platform has an ASA 5510 Security Plus license." ...

rpulley · 02-21-2011

I am trying to create redundant cores, the problem I am having is with my VOIP routers. I would like to have each router physically connected to each core while having only 1 IP address. My testing will be to alternately shutdown 1 core switch at a...

rpulley · 06-08-2004

I am trying to send out a route via ospf so I don't have to put static routes on all my routers. The destonation address is an external IP and not currently advertized via ospf. I though the route-map would do this. Here is what I tried but it did ...

rpulley · 02-21-2011

Thanks for your input; it was the best I could come up with too. Not to say there is anything wrong with doing bridge-group if thats the only way. I was just hoping there was some new Cisco advancement that could do a better job then an 18 year old...

rpulley · 06-09-2004

That did it. The route needs to match the access list and it works now.

Member Since	‎10-26-2001 10:04 AM
Date Last Visited	‎03-28-2023 09:04 AM
Posts	6

User Statistics

User Activity

CSCvw19324 - FP2100 traceback observed in IKE daemon

ASA License Pulling

Full redundancy, 1 ip address per router (two router interfaces 1 IP)

Advertizing a single static route(or network) through the OSPF

Re: Full redundancy, 1 ip address per router (two router interfa

Re: Advertizing a single static route(or network) through the OS