Dear all,I am seeing the below log continously.Jul 19 08:30:26.734 UAE: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 8/1Jul 19 08:30:27.754 UAE: WiSM-Evt:dman_reg_arp_added: cntrl 4/1 got an ip 192.168.10.70 0017.e0a6.6142/00...

We have two different version of controller 4.2 and 7.0. Can we have them in one mobility group and how the roaming will be effective?

what is the best data rate to set in high density client environment and disabling 802.11b clients.

I have cisco LWAPP 1242 AP already joined controller but 802.11b/g shows down on the radio 0 interface. I tried to enable it but it comes with an error" Error in enabling admin status". I have resetted the AP to factory default settings and even repl...

I could see that antenna gain setting under 802.11b/g ap showing 0 valu. However, the antenna connected to that AP is AIR-1728 which has 5.2dbi. Please let me know if it shows 0 then will I get the Maximum power ? or do we need to change ito some val...