About fwadmin

fwadmin · 12-09-2020

I am attempting to update to the new CollectorVersion 2.9.0 from 2.8.1.8. The ssh level admin, collectorlogin and root passwords were requiring reset under 2.8.1.8 when I went to start the backup/migration script part of the upgrade. I logged into ad...

fwadmin · 09-14-2020

domain-name fortinet.comenable password 2KFQnbNIdI.2KYOU encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1shutdownno nameifsecurity-level 100no ip address!interface Vlan2nameif managesecurity-level 80ip address 172.16.0.2 255.255.255.0!...

fwadmin · 01-30-2018

Our current environment: TMS v.15.4.0 hosted on a Windows Server 2008 R2; a remote SQL database server 2008 (a separate server) hosting the TMS database. We also have TMSXE (v.5.4.0) running on a separate Windows Server 2008 R2. In summary, there are...

fwadmin · 12-01-2017

In our board room, we have a SX80 codec (running CE8.3.2). There are multiple microphones (one microphone per seat on the board room table) in the room (we are not using Cisco microphones) that go into three ClearOne devices. From the output of the C...

fwadmin · 08-26-2015

We have planned on switching two endpoints in TMS. The two endpoints are currently located at two meeting rooms. Currently Room1 has a Cisco Telepresence SX80 and Room2 has a Cisco Telepresence SX20. Basically what we want to move SX80 to Room2 and m...

fwadmin · 12-09-2020

Hi Andre, Thanks for the quick response. That command works. I had upgraded another collector to 2.9 last week and sudo - was giving me just a password prompt that took me to root on that system. Moving on to this other one I expected the same beh...

fwadmin · 09-15-2020

Yes I do:Result of the command: "ping 208.91.112.52"Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 208.91.112.52, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 20/20/20 ms Result of the command...

fwadmin · 02-16-2018

Hi Patrick Yes, you are right, To correct. got the following error when "Use HTTP" was checked. After unchecked the checkbox and resaved, it started working. Under Server Address, I use the FQDN of the TMS server. I also tried IP address of TMS an...

fwadmin · 02-16-2018

yes, I can access TMS using HTTP and HTTPS. We use a self-signed cert issued by TMS itself for HTTPS connection. Communication Security is set up Medium. so I guess TMSXE couldn't reach the new TMS server through HTTPS when I run into the problem?...

fwadmin · 02-16-2018

successfully migrated TMS and the database to new servers last night. The installation of TMS15.6.1 on the new Windows Server 2016 was simple. The only thing you need to specify is the new database server's DNS name or IP address (migrate the TMS da...

Member Since	‎12-14-2004 06:25 AM
Date Last Visited	‎11-15-2023 01:55 PM
Posts	23
Total Helpful Votes Received	1

User Statistics

User Activity

Collectorlogin does not sudo to root properly

cisco ASA can not resolve domain name

TMS move to Windows Server 2016

Cisco SX80 and ClearOne - auido issue at far end in video confernece

Exchange two endpoints on TMS

Re: Collectorlogin does not sudo to root properly

Re: cisco ASA can not resolve domain name

Re: TMS move to Windows Server 2016

Re: TMS move to Windows Server 2016

Re: TMS move to Windows Server 2016