I'm not much on using the CLI.  My question is if I use the Web access page for our Cisco 9300 catalyst switch to create a port-channel what is the default protocol?  Is it LACP or PAgP.  These port-channels will be used for connecting to Meraki swit...

Checking for thoughts on which would be the best configuration for port channels for the uplink interfaces on our usc to our catalyst 9300 switches. Option A - Create a 2 port channels on the switches with members TenG 1/1/1 and TenG 2/1/1 for Port C...

It has been suggested that for our connection from our UCS FI to our Catalyst 9300 stack that we create Virtual Port channels for redundancy.  A quick search informs me that the Catalyst 9300's do not support VPC's.  What's the advantage of VPC's ove...

WE have been working on setting up vlans to divide our network up.  On our Catalyst 9300 switch I have 5 vlans created and 5 SVI for routing between vlans.  All our endpoints are connected to Meraki switches.  The Director of IT wants to control at t...