SubnetWarrior
Level 1
Level 1
Member since ‎08-08-2018
‎09-12-2021

User Statistics

  • 40 Posts
  • 0 Solutions
  • 15 Helpful votes Given
  • 10 Helpful votes Received
Recent Badges
10 Helpful Vote
10 Replies
1 Helpful Vote
5 Replies

User Activity

Hello experts,So i begin to study isis but i stuck and need your help. This is my topology : In shorts, on R4 and R1, they are not receiveng 192.168.1.12/32 prefix form R3. But in R2, it is receiving 192.168.1.12/32 from R3. I'm sory for the very bas...
Hello Experts!So i have a problem that the server has tcp reset flag. My customer want to know is there any way that the cisco ASA reset the tcp connection? In my understanding that the asa will reset the connection when the tcp session is idle for 1...
Hello Experts!My customer have ASR1002  IOS-XE 15.1.(3).So they want to make Gi1/0/1 and Gi1/0/2 as 1 port channel (Po1). From that Po1, they want to make 2 subinterface po1.300, po1.305. Po1.300 as GW for VLAN300 and Po1.305 as GW for VLAN305. This ...
Hello experts, So i have an L3 switch (3850) and N7K. They are connected by a single link 1 gig. Gi1/0/1 in 3850 and eth3/3 in N7K. That one link is to connect ospf. On 3850 side, Gi1/0/1 is a trunk, and the ospf in 3850 is on its interface vlan. On ...
Hello Experts!So my clients wants to implement C2348TQ fex which has 6 uplink fex port to the Nexus 5K.But in nexus 5K there are just 2 tengig port. Can we just use those 2 tengig port as fex uplink?
Community Statistics
Member Since ‎08-08-2018 03:56 PM
Date Last Visited ‎09-12-2021 09:10 AM
Posts 40
Total Helpful Votes Received 10
Helpful Votes From
Helpful Votes Given To