About spindoctor64

spindoctor64 · 02-02-2012

spindoctor64 · 01-26-2012

I searched for a long time unsuccessfully trying to find a resolution to my SSG320M and Cisco ACS v5.x TACACS dilemma. I finally got it working in my network, so I'm posting the resolution here in case anyone else is looking.Configure the Juniper (C...

spindoctor64 · 02-22-2019

use “no errdisable detect cause gbic-invalid” command Most likely Cisco Bug: CSCuj31712 - certain Vendor SFP force ports to err-disable: https://quickview.cloudapps.cisco.com/quickview/bug/CSCuj31712

spindoctor64 · 05-29-2012

aaa accounting only has to do with logging the commands, not whether the commands are authorized.You generally also want your authentication and authorization to come from the same place, such as the ACS only.Your config: aaa new-model aaa authenti...

spindoctor64 · 05-29-2012

Assuming Cisco ACS v5.x:Create a new Shell Profile: Policy Elements > Authorization and Permissions > Device Administration > Shell ProfilesClick the Create button at the bottom of the page.On the General tab, give the profile a name, then go to ...

spindoctor64 · 05-25-2012

On my SSG, I have the following: set auth-server "Local" id 0 set auth-server "Local" server-name "Local"On the SSG webGUI, I go to Configuration > Admin > Administrators and there is a drop-down for "Admin Auth Server." I have "Local/CiscoACS" se...

spindoctor64 · 05-25-2012

Marlon,I have pasted in a config below that I did for our ScreenOS firewalls to work with Cisco ACS v5.2. This config may not work since yours is Junos, but it might get you closer to figuring it out. Also, if you haven't been on the Juniper J-Net ...

Member Since	‎01-24-2012 10:35 AM
Date Last Visited	‎09-11-2020 12:28 AM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

BlueCoat PacketShaper and Cisco ACS v5.x Configuration.pdf

Juniper SSG and Cisco ACS v5.x Configuration

Re: C3850-NM-4-10G went to err-disable when using 1GE SFP's

Re: Want to directly login to # prompt

Re: Want to directly login to # prompt

Re: how to configure ACS 5.2 to manage Junos 10.4R6.5 fwl via T

Re: how to configure ACS 5.2 to manage Junos 10.4R6.5 fwl via T