With current logs, it is not voice configuration issue and more over data configuration issue.My understanding about Internal outbound call flow as follows:SIP Phone --> CME --> SIP --> CUCM --> 8969 (another Phone SEPE0D173E58BEC in CUCM).Please cla...
From shared ccsip debugs and new_rtmt output and it appear as network issue.++ CUCM received the call Invite from Gateway:2015/08/01 15:00:00.222|SIPT|0|UDP|IN|172.16.5.100|5060|Nangaharsiptrunk|172.18.3.129|51394|1,100,220,1.176^172.18.3.129^*|98737...
Expected/ Default behavior, for CCX inbound calls when agent phone is RINGING then agent will see CTI Port number and once call is answered by agent then agent should see the Original calling party number.This is applicable for both Internal/External...
To use SIP trunk between CME and CUCM, below are the recommendations:1. From debug, CME received single digit from Phone and it looks like related to bug: CSCum05299.Add below configuration and hard reset the phone: voice service voip ...
Based on your setup, CUCM 10.5 is compatible with 2900 IOS 15.4T and above.Also the CUBE box-to-box redundancy HA implementation supported release 15.1.2T and above.In CUBE-HA, once HSRP is configured under the physical interface and the bind command...
