About rayeesece4

rayeesece4 · 03-02-2012

hello guys,I have been facing this issue since couple of days with 2 of my switches. trunk port, access ports changing status to down/up every 5 seconds. not stable.please can someone point me in right direction.see the attached log & configurationth...

rayeesece4 · 03-03-2012

My network is a residential one which has around 250 users, comprising of 10 2950 & 2960 switches, there are few unmanageble switches as well.

rayeesece4 · 03-03-2012

Thanks for your help guys, finally I ended up with the faulty trunk cable which was leading to this problem. Now it seems alrite.Thaks again for your quick help & guidence Leo & Peter.Shaik.

rayeesece4 · 03-03-2012

Distro is also a 2950.. is it OK to use 2950 as distribution switch or should I use a distro level switch only? FYI, no reduandant links in network.I am gonna look at the cabling now, will keep u posted if any luck. thank u leo & peter.

rayeesece4 · 03-02-2012

Trunk Line connected to fa 0/1 from distribution switch.it used to work fine but since couple of days i'm noticing this problem.here are the details requested.#sh int fa0/1FastEthernet0/1 is up, line protocol is up (connected) Hardware is Fast Ether...

Member Since	‎02-29-2012 12:00 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Cisco 2950 trunk/access port status up/down every few seconds

Cisco 2950 trunk/access port status up/down every few seconds

Re: Cisco 2950 trunk/access port status up/down every few second

Cisco 2950 trunk/access port status up/down every few seconds

Cisco 2950 trunk/access port status up/down every few seconds