Hi, We are mounting some AIR-ANT2588P3M-N= directional antennas and remoting them via 5ft AIR-CAB005LL-N and AIR-CAB010LL-N. The Cisco 1560 APs will operate in dual band, my question is do I use 3 x RF cables connected to 3 ports on the AP or 2 x ca...
Hi, We are deploying Cisco 1562e APs in dual-band mode with the AP body hidden and the antennas remoted a short distance of approx 1-2m via Cisco RF Co-AX Cable. In the past I have always mounted the remoted Antennas the same distance apart as from ...
Hi,
We are looking at large area deployment of AIR-CAP1552E-x-K9 with x 2 AIR-ANT2547V-N my first question is if we use 2 x dual band Antennas is there any reduction in coverage or capacity etc or is it pretty much the same as using 4 x single band ...
Hi,
We have some 1572's with AIR-ANT2547V APs and the customer has requested the AP body is hidden so are looking at remoting the dipoles on 1m to 3m RF cables so only the dipoles are visible, will the likes of AIR-CAB005LL-N or AIR-CAB010LL-N work ...
Hi, Where would I find information on the MiMo configuration on a Cisco AP, I have heard that certain models which do not obtain the correct PoE etc will 'switch' a MiMo pair off, or something similar? Is there a show command or is it in Sh controll...
HI, Thanks for the replies, I know the diversity of the antennas can and does come into the equation but the reason I asked was in the world of newer N standard technology and beyond I wasn't sure if the problem of diversity and the use of much more...
Scott,
Excellent advice and you have confirmed what I had planned on the install about the water ingress and 'drip loop' etc always nice when someone confirms what you had planned makes you feel you wasn't going too far.
The lightning arrest is very ...
George, Scott,
Many thanks for the fast and informative replies, we are going to try and mount the antennas the same width apart they would be on the AP just to keep everything within that scope.
I have rated your answers.
Regards
Mick
Scott, George, Thanks for the replies they have really helped, let me give you a bit more information on what I am trying to do.We noticed a few months ago that our current survey battery setup couldn't power up a Cisco 1532 or 1572 the radios would ...
