About hungdoannguyen

hungdoannguyen · 12-21-2018

Hello, I am having issue with Remote access VPN users which will not able to ping to inside network because of a dynamic PAT statement which translating that subnet to internet. However, once I removed that NAT statement VPN users will be able to rea...

hungdoannguyen · 05-14-2019

Hi Mario, It is awesome. I applied your configuration and the switch took it without any error. I really appreciate. I have another question. Could you show me what is the best way to limit the bandwidth in out interface? I am trying to limit the ban...

hungdoannguyen · 05-10-2019

I solved the issue. The issue was the NAT statement wasnt in correct order.

hungdoannguyen · 05-10-2019

Hi Mario, It's been a while but I got the same error in C9300, could you point me out what is wrong in my configuration: 1. Create a Traffic Class:access-list 101 permit ip any host 192.168.211.101class-map match-all CLASS_VDImatch access-group 101 2...

hungdoannguyen · 12-27-2018

I removed some of unrelated configuration to make it more clear.ip local pool genericVPN 10.100.0.100-10.100.0.199 mask 255.0.0.0ip local pool dc_poc_addr 10.100.0.25-10.100.0.26 mask 255.0.0.0ip local pool CCH_VPN_Pool 172.31.151.200-172.31.151.240 ...

hungdoannguyen · 12-27-2018

Hi Georg,Sorry for late response, I was out of town.Here is the schematic diagram:-----------| ASA |-----------||192.168.200.0/24-----------| L3 SW |-----------/\/ \/ \------- -------| L2 SW | | L2 SW |------- -------VLAN 157 VLAN 172157.145.163.0/24...

Member Since	‎08-28-2018 05:53 PM
Date Last Visited	‎07-23-2019 05:18 PM
Posts	8

User Statistics

User Activity

ASA 9.x dynamic PAT issue

Re: Cannot set service-policy output on 3850

Re: ASA 9.x dynamic PAT issue

Re: Cannot set service-policy output on 3850

Re: ASA 9.x dynamic PAT issue

Re: ASA 9.x dynamic PAT issue