Hello all,We are having weird behaviors in our production. Attached you can find back our network topology.When the industrial switch "SFNB 5TX PHOENIX CONTACT" (red circle) is not connected to our 2960X Cisco switch, the values (numbers of productio...
Hello @Giuseppe Larosa , First of all, thanks for your quick replies!I configured the voice vlan for the PROFINET protocol to be able to work. Apparently that's some kind of workaround (or configuring "dot1p").Btw, we have removed the unmanaged PHOEN...
Hello @Giuseppe Larosa , we have done the tests with your recommendations but still no improvement.The port config we tried:interface GigabitEthernet1/0/11description ## UNOTECH ##switchport access vlan 672switchport mode accessswitchport nonegotiate...
Hello Giuseppe, Thanks for your quick reply!I will try again with your suggestions.We only need access to be able to monitor them. But it's really weird that connecting the PHOENIX switch to our 2960X Cisco causes inaccurate values on the displays......
